互联网技术在广播电视领域的应用研究

随着信息社会和IP化互联技术的迅速发展,互联网技术在广播电视领域的融合应用不断向纵深推进.基于此,从新时代背景下互联网技术为广播电视行业带来的影响出发,围绕广播电视行业实施IP化的初衷、实施IP化的条件与背景以及目前广播电视行业的主流IP化应用展开研究.     

双目结构光系统仿真建模和误差灵敏度分析

结构光系统目前在三维测量、逆向工程等领域应用日益广泛,然而关于结构光系统性能评测方法的研究成果仍然很少,仅有少数国际标准给出了3D扫描系统的性能评测方法.本文首先建立了双目结构光系统的仿真模型,其中包括了相机镜头畸变模型和针孔成像模型,实现投影仪投射数字正弦条纹的仿真和被扫描的靶球特征量仿真计算,采用的三维重建方法为光学三角法.然后基于仿真模型,对其基线距离相关的误差灵敏度进行了仿真,发现靶球中心位置和靶球球心距对基线距离误差具有较高的灵敏度,可以作为测试方法的输出.最后,如果只考虑基线距离误差,标准测试方法中的校准球棒的位置应在测量范围内的相对距离尽可能大,为标准性能评测方法提供了改进建议.     

Direct View on the Origin of High Li+ Transfer Impedance in All-Solid-State Battery

Large interfacial resistance plays a dominant role in the performance of all-solid-state lithium-ion batteries. However, the mechanism of interfacial resistance has been under debate. Here, the Li⁺ transport at the interfacial region is investigated to reveal the origin of the high Li⁺ transfer impedance in a LiCoO₂(LCO)/LiPON/Pt all-solid-state battery. Both an unexpected nanocrystalline layer and a structurally disordered transition layer are discovered to be inherent to the LCO/LiPON interface. Under electrochemical conditions, the nanocrystalline layer with insufficient electrochemical stability leads to the introduction of voids during electrochemical cycles, which is the origin of the high Li⁺ transfer impedance at solid electrolyte-electrode interfaces. In addition, at relatively low temperatures, the oxygen vacancies migration in the transition layer results in the formation of Co₃O₄ nanocrystalline layer with nanovoids, which contributes to the high Li⁺ transfer impedance. This work sheds light on the mechanism for the high interfacial resistance and promotes overcoming the interfacial issues in all-solid-state batteries.     

Distributed dictionary learning for industrial process monitoring with big data

Applied Intelligence - With the development of sensor and communication technology, industrial systems have accumulated a large amount of data. This data has provided new perspectives and methods...     

人体步态差异性的参数化辨识方法及应用

通过对下肢3 个关节步态曲线建立具有共性控制点的数学模型,提出了以个体的局部形状参数作为区别同一关节中不同曲线的方法.实验采用Perception Neuron 动作捕捉系统,对正常组10 名健康男性青年,验证组2 名健康和3 名处于不同康复期的右腿踝关节损伤男性青年在正常步速下的步态数据进行实验测量以获得髋关节、膝关节和踝关节的上下位移轨迹曲线,并计算得出正常组步态曲线的局部形状参数作为判别步态正常与否的参考调整范围.经分析,验证组中健康被试者的局部形状参数大多属于该范围,而恢复较差的病人参数大多超出该范围,表明该参数化方法可有效辨别步态曲线差异,此外还可对康复评价的方法提供依据.     

温度对黑豆皮活性成分、抗氧化和抗肿瘤活性的影响

在不同温度下用蒸馏水浸提黑豆皮,测定了黑豆皮提取物中总黄酮、总酚、花青素、碳水化合物、蛋白质、糖醛酸等6种活性成分的含量,并体外评估了其抗氧化活性和抗肿瘤活性.结果表明,90℃浸提时,黑豆皮提取物中的总黄酮、总酚、蛋白质、糖醛酸含量最高,分别为(11.555±0.160)％、(1.454±0.070)％、(13.096±0.600)％、(21.587±1.570)％;花青素含量在80℃浸提时达到最高,为(0.199±0.003)％;而碳水化合物的含量则在100℃浸提时达到最高,为(65.566±1.448)％.随着黑豆皮提取物浓度的增加,其总还原能力和对DPPH自由基的清除能力逐渐增强且呈线性关系;黑豆皮提取物具有抑制肿瘤细胞增殖的作用,能够有效抑制人胃腺癌细胞株(BGC-823)、宫颈癌细胞株(HeLa)和人大细胞肺癌细胞株(NCI-H460)的增殖且呈浓度依赖关系.表明黑豆皮提取物具有成为功能性保健品的潜能,为其产业化开发奠定了重要基础.     

微纳层叠聚丙烯腈凝胶流动特性的数值模拟研究

建立了层叠流道的三维模型和有限元网格模型，根据流变测试数据，采用Polymat对物料的黏度模型参数进行拟合，并利用Polyflow软件对聚丙烯腈（PAN）凝胶在层叠流道内的三维等温流动过程进行了数值模拟分析。研究发现，当入口流量增大时，层叠流道出口速度的不均匀性增加；沿流动方向流道内压力逐渐降低，并在出口处降低至同一最低值；流道进出口压力差与入口流量大小具有正相关性；在流道的中心截面上剪切速率分布均匀，波动较小。     

Improvement of mechanical property and corrosion resistance of Mg-Zn-Nd alloy by bi-direction drawing

Mg-Zn-Nd alloy is a promising biodegradable metal material for surgical staples during the reconstruc-tion of digestive tract due to its good biocompatibility and suitable mechanical properties.However,its deformation property and corrosion resistance should be improved to make better safety and effective-ness of staples.In the present study,bi-direction drawing was adopted to maintain the initial texture characteristics,and improve mechanical property and corrosion resistance of Mg-2Zn-0.5Nd alloy.The results showed that the microstructure after bi-direction did not change too much,but the texture could maintain its initial characteristics.The ductility of the alloy with 60 ％ accumulative area reduction after bi-direction drawing was increased by 70 ％,indicating that an outstanding deformation property of Mg-Zn-Nd alloy can be obtained by bi-direction drawing.The corrosion resistance was also improved after bi-direction drawing compared with that under single direction drawing.     

低共熔溶剂用于CO2捕集的研究进展

低共熔溶剂(DESs)具有原料廉价易得、化学稳定性好、可设计、合成工艺简单、可循环使用和绿色环保等优点,在CO₂捕集领域受到广泛关注。重点综述了近年来DESs用于CO₂捕集的研究进展,总结了DESs捕集CO₂的能力,分析了DESs捕集CO₂的影响因素和DESs的循环使用性能,归纳了DESs捕集CO₂的机理(包括物理吸收、化学吸收和物理化学协同吸收),并总结了CO₂在DESs中的溶解度计算模型。分析发现,DESs捕集CO₂的影响因素中,温度、压力和水含量(质量分数)均对CO₂的捕集有影响,且DESs的结构是重要的影响因素;大部分DESs可循环使用;CO₂在DESs中溶解度计算模型的建立有效推动了DESs捕集CO₂的进一步发展。最后,指出了DESs捕集分离CO₂所面临的主要问题并对进一步的研究工作进行了分析讨论。